Description

Economy Undercoat is a quick-drying oil-modified alkyd-based undercoat with good build.

Specifications

Paint Type: Solvent based

Product Type: Interior & Exterior

Finishing: Matt

Recommended Substrate: Wood and Metal

Surface Preparation

Wood 

Surface must be dry and free from dirt, grease and other contaminants. Smoothen surface with sandpaper and then clean off and dry. The scraped areas should be spot-primed using an undercoat for wood surfaces. Light sanding on surface would ensure better subsequent intercoat adhesion.

Metal 

Surface must be dry and free from dirt, grease and other contaminants. Ferrous substrate should be sanded or wire-brushed to remove mill scales and rust. Clean off dust and dry. The scraped areas should be spot-primed using a primer for metal. Light sanding on surface would ensure better subsequent intercoat adhesion.

Safety Precautions

Keep container tightly closed and keep out of reach children or away from food and drink.

Ensure good ventilation during application and drying.

When applying paint, it is advisable to wear eye protection.

In case of contact with eye, rinse with plenty of water immediately and seek medical advice.

Remove splashes from skin by using soap or water.

Paint must always be stored in a cool place.

When transporting paint, care must be taken. Always keep container in a secure upright position.

Dispose off any paint waste in accordance with the appropriate Environment Quality Regulations.