CPM900 Car Body Putty Filler 3.5kg (Brown) with Hardener

Previous 15 / 16 Next

CPM900 Car Body Putty Filler 3.5kg (Brown) with Hardener Putty & Fiberglass Car Paint


APPLICATION 1) Remove rut, oil dirt, old stain, water etc. fro surface completely by sanding and using of solvent. 2) Ste dard mixing ratio of Base Po ester Putty and Hardener is Polyester/Haener = 100/2 Veight Ratio). 3) Knead polyester and hardener thoroughly fo ale the ca dr of the mixture uniform. 4) After complete mixing, apply the mixture with in the puing time of 5-7 minutes.The curing time changes depending on the temperature and humidity of the weather. 5) Rub down the mixture fully with proper tool to avoid bubbling 6) Sandinshall be made after complete drying (1 hour, at 20). In high humidity areas, especialy y season, the curing time becomes longer than usual.

Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Attachment  
*only support gif, jpeg, jpg, png, pdf
Messages*  

Switch to Mobile Version
Subscribe Newsletter